NEW models (novelty)

take a look to our new models for this year, handles, pulls and a lot of good design

TAKE A LOOK TO OUR NEW MODELS,  handles, pulls, knobs... We have and a lot hardware with a good design.

929-45.jpg

929-45 Oporto handle on square rose

handle Model Oporto (929-45 CNS) with square rosette.

It is made of Zamac (zinc alloy), this elegant design enhances its bright lines with the contrast of bright chrome with satin-nickel, a combination of elegant curves is dynamic and attractive design, comfort and finishes have made this design in one of our 2015 news.
New
931-45cns.jpg

931-45 Lisboa model

Lisboa handle on square rosette model: 931-45 CNS. made of Zamak (zinc alloy), this elegant, simple, and modern design becomes the center of the attention with bright chrome contrast with the satin nickel
New
TECHNA handle with rose

TECHNA handle with rose

TECHNA handle has an elegant presence and modern, this new handle made ​​on zinc alloy is a piece of italian quality and design, one of our new features for this year.
Featured
FLASH handle with rose

FLASH handle with rose

Handle avant-garde and modern Italian design, a piece of quality and design thanks to their design and elegance has managed to become one of our new products this year 2015,

available in satin chrome, polished chrome
New
Manillones toalleros cuadrados para Ducha (novedad 2015)

Manillones toalleros cuadrados para Ducha (novedad 2015)

manillónes cuadrados especial para ducha con toallero y tirador. 

disponibles en brillo o satinado, medidas:

200 x 400

400 x 400

600 x 600 
Asas de embutir

Asas de embutir

Asas de embutir fabricadas de acero inxidable 304 con la parte trasera ovalada. 

Disponibles con frontal ovalado o rectangular en las siguientes medidas:

120 x 40 mm OVALADA  
150 x 50 mm OVALADA 

120 x 40 mm RECTANGULAR
150 x 50 mm RECTANGULAR
asaq.v1.jpg

Asas de embutir rectangulares

Asas de embutir fabricadas de acero inxidable 304 con la parte trasera ovalada. 

Disponibles con frontal ovalado o rectangular en las siguientes medidas:

120 x 40 mm OVALADA  
150 x 50 mm OVALADA 

120 x 40 mm RECTANGULAR
150 x 50 mm RECTANGULAR
FLAT

FLAT

The new sliding door pull handles “Flat” and “Otto”, designed by Mario Mazzer, win the prestigious international prize Red Dot Design Award 2013 in the category “Product design”.
«After the Good Design Award 2012 obtained with the handle Alamaro, by Mario Mazzer, we feel honoured», declares Luigi Bigoloni, the owner of the Company, «to receive a new award for these two handles, designed to express our Made In Italy soul, based on design and technical innovation».

Designer: Mario Mazzer (Italy) 
Manufacturer: MANITAL (Italy)
FLAT-S

FLAT-S

KIT SLIDING DOOR AND ITALIAN DESIGN MANUFACTURING, AND HANDLE WITH felons.

36mm suitable for doors up to 45 mm approx. features: Cups and hangnail / shooter. all integrated in a simple and practical elegant piece.

Designed by Mario Mazzer, he got an honorable mention in 2013 at the Reddot award prizes desing
OTTO

OTTO

A sliding door pull which stands out for its design and technological innovation: a single plate, characterised by an elegant figure of eight shape (‘Otto’ means ‘eight’ in Italian) created by the intersection of two circles, combines the door’s opening and closing functions.
The lower circle englobes the thumb-turn locking knob, and the upper circle the sliding/opening function.

Designer: Mario Mazzer (Italy) 
Manufacturer: MANITAL (Italy) 
Material: forged brass 
 
doorcloser D.50

doorcloser D.50

MOD D50 DOOR CLOSER TO 65 KG, FORCE 2/3
ALL OUR DOOR CLOSERS HAVE THE CE CERTIFICATE 1154 FOR FIREWALL DOORS
DOWNLOAD OUR TECHNICAL SPECIFICATIONS ON THE DOWNLOAD ZONE
Featured
DOOR CLOSER D80

DOOR CLOSER D80

MOD D80 DOOR CLOSER TO 80 KG, FORCE 2/3/4
ALL OUR DOOR CLOSERS HAVE THE CE CERTIFICATE 1154 FOR FIREWALL DOORS
DOWNLOAD OUR TECHNICAL SPECIFICATIONS ON THE DOWNLOAD ZONE
Featured
DOOR CLOSER D20

DOOR CLOSER D20

MOD D20 DOOR TILL 100 KG FORCE 2/3/4/5

ALL OUR DOORCLOSERS HAVE THE CE CERTIFICATE 1154 FOR FIREWALL-DOORS

DOWNLOAD OUR TECHNICAL ON THE DOWNLOAD ZONE
Featured
918-40 Elora PULL HANDLE WITH ROSES

918-40 Elora PULL HANDLE WITH ROSES

Handle Elora (918-40) made of aluminum, with rosettes straight edge. 220 distance, center to center distance of 200 mm.
Nic-Sat available in (ABM) antique brass matte.
New
manillon_twister_byCARVI.png

Twister pull handle

Twister Handle made of brass, a, also suitable for glass doors elegant, robust and powerful piece.

Because of its dimensions is one of the largest in our collection, this pull handles (without rosettes) has a length of 30 cm with a center to center distance of 280 mm. This robust piece has a weight of about 930 gr.

A pull handles made of brass with finishes care, durable and attractive that reflect their grandiosity and quality.

available at: Nic-Sat, Bright Chrome or Polished Brass.
Asas de embutir (copia)

Asas de embutir (copia)

Asas de embutir fabricadas de acero inxidable 304 con la parte trasera ovalada. 

Disponibles con frontal ovalado o rectangular en las siguientes medidas:

120 x 40 mm OVALADA  
150 x 50 mm OVALADA 

120 x 40 mm RECTANGULAR
150 x 50 mm RECTANGULAR
SATURN

SATURN

This elegant and robust model made of brass has a variety of customizations and unique combinations, this piece has been awarded a prestigious design award in 2015.

the variety of discs, finishes and possibilities makes this piece a masterpiece of interior design and decoration.

A piece of quality and design of its unique finish, careful image, its delicate elavoración and the endless combinations ... has become one of our new products this year.
New
RATIO

RATIO

 

This elegant and robust model made of brass has a variety of customizations and unique combinations, this piece has been awarded a prestigious design award in 2015.

A piece of quality and design of its unique finish, careful image, its delicate elavoración and the endless combinations ... has become one of our new products this year.
Presso

Presso

Robust, powerful, powerful character and an imposing presence ... to yet elegant model, all you could expect and more from a model of Italian manufacturing and design.

 

 
BLADE

BLADE

A handle capable of expressing the synthesis of the contemporary. A primary sign for modern and strong-temperament interior.

Designer: Maurizio Giordano & Roberto Grossi

 

 
VICTORIA

VICTORIA

Fantastic and wonderful full details handle with a finish and exquisite production, the model is distinguished Victoria and reinvents with each of the finishes available. a masterpiece of decoration and interior design that has become one of our new products this year. the model Victoria recalls the Baroque Style with precious and decorative inlays.
New
YORK

YORK

Handle classic design, made of brass and full of details, its finish and its definition make it an exquisite piece. the York model is located within the Fenice Classic Handels range of Manital,

a classic and distinctive touch that has become one of our new products this year.

this model evokes the Empire Style with its rigorous lines and octagonal form.
New
FRENO HIDRÁULICO SIN OBRA PARA PUERTAS DE CRISTAL

FRENO HIDRÁULICO SIN OBRA PARA PUERTAS DE CRISTAL

kit de bisagra/freno para puerta de cristal en acero sin necesidad de obra.

Rangos ajustables: velocidad de cierre y velocidad de frenado.

peso maximo 100 Kg

 
New
TWISTER

TWISTER

Manilla modelo Twister fabricada en latón. Este atrevido diseño, cómodo, elegante y con presencia es una de nuestras novedades de este 2016, comparte la belleza de las lineas rectas junto a las suaves y deslizantes curvas de su complemento perfecto: el manillón Twister. 

El diseño, la robustez, la elagancia y el mimo a los detalles hacen que estas piezas un elemento decorativo perfecto.

 
New
Condena pala ancha

Condena pala ancha

condena con indicador fabricada en acero 304

 
New
Pinza tubo-panel de 2 posiciones

Pinza tubo-panel de 2 posiciones

Elemento de unión entre los paneles y el tubo de instalación. esta pieza admite dos posiciones fijas respecto al tubo: 

90 grados o 180 grados. esta fabricada en acero 304 

 
New
KIT DE PUERTA CORREDERA PARA CABINAS SANITARIAS

KIT DE PUERTA CORREDERA PARA CABINAS SANITARIAS

Conjunto de elementos para la instalación de una puerta corredera en cabinas fenólicas.

concebido para su uso en vestuarios, baños y cabinas sanitarias para aprovechar el espacio y/o facilitar su uso a personas de movilidad reducida.

fabricado en acero inoxidable 304 y goma, este kit se compone de:

pinzas de unión tubo puerta, topes de final de carrera (antigolpes), condena tubular con gancho e indicador y guia raíl
New
Furniture Pulls 800 series

Furniture Pulls 800 series

 Furniture Pulls 600 series, maid in 304 stainless steel, with a diameter of 12 mm. 

Measures Center to Center and Total: 
   96 mm 136 mm 
  128 mm 168 mm 
  160 mm 200 mm 
  192 mm 232 mm 
  288 mm 328 mm 
  384 mm 424 mm 
  480 mm 520 mm 
  576 mm 616 mm 
  672 mm 712 mm 
  840 mm 880 mm 
  1105 mm 1145 mm
New
KIT DE PUERTA CORREDERA PARA CABINAS SANITARIAS

KIT DE PUERTA CORREDERA PARA CABINAS SANITARIAS

Conjunto de elementos para la instalación de una puerta corredera en cabinas fenólicas.

concebido para su uso en vestuarios, baños y cabinas sanitarias para aprovechar el espacio y/o facilitar su uso a personas de movilidad reducida.

fabricado en acero inoxidable 304 y goma, este kit se compone de:

pinzas de unión tubo puerta, topes de final de carrera (antigolpes), condena tubular con gancho e indicador y guia raíl
New
KIT DE PUERTA CORREDERA PARA CABINAS SANITARIAS

KIT DE PUERTA CORREDERA PARA CABINAS SANITARIAS

Conjunto de elementos para la instalación de una puerta corredera en cabinas fenólicas.

concebido para su uso en vestuarios, baños y cabinas sanitarias para aprovechar el espacio y/o facilitar su uso a personas de movilidad reducida.

fabricado en acero inoxidable 304 y goma, este kit se compone de:

pinzas de unión tubo puerta, topes de final de carrera (antigolpes), condena tubular con gancho e indicador y guia raíl
New
Modelo 880

Modelo 880

Manivela con placa modelo 880 fabricada en latón.

dimensiones de la placa: 265 x 50mm 

acabados disponibles: cuero satinado mate o  latón brillo-satinado
New
Niza

Niza

manivela modelo Niza fabricada en aluminio con un acabado combi en cromo/niquel satinado.

un dieño moderno elegante y novedoso que se ha convertido en una pieza muy valorada entre nuestros clientes.
New
Paris

Paris

manivela modelo Paris fabricada en zamac. ref: 932 

una manilla con caracter, presencia , vanguardista y capaz de unificar las líneas rectas con un suave ondulado. su combinación de color en brillo y satinado resalta su naturaleza moderna su comodidad y su elegancia.

una de nuestras últimas novedades capaz de vestir cualquier puerta.
New
lyon

lyon

manivela modelo Paris fabricada en zamac. ref: 932 

una manilla con caracter, presencia , vanguardista y capaz de unificar las líneas rectas con un suave ondulado. su combinación de color en brillo y satinado resalta su naturaleza moderna su comodidad y su elegancia.

una de nuestras últimas novedades capaz de vestir cualquier puerta.
New
3001

3001

Juego de manivelas con roseta modelo 3001 fabricado en acero inoxidable 304. 

equipada con nuestra nueva roseta de 52 mm ahora con rosca.
New
3002

3002

Juego de manivelas con roseta modelo 3001 fabricado en acero inoxidable 304. 

equipada con nuestra nueva roseta de 52 mm ahora con rosca.
New
3003

3003

Juego de manivelas con roseta modelo 3003 fabricado en acero inoxidable 304. 

equipada con nuestra nueva roseta de 52 mm ahora con rosca.
New
3004

3004

Juego de manivelas con roseta modelo 3004 fabricado en acero inoxidable 304. 

equipada con nuestra nueva roseta de 52 mm ahora con rosca.
New
3005

3005

Juego de manivelas con roseta modelo 3005 fabricado en acero inoxidable 304. 

equipada con nuestra nueva roseta de 52 mm ahora con rosca.
New
Roma

Roma

manivela modelo Roma fabricada en aluminio con un acabado combi en cromo/niquel satinado.

un dieño moderno elegante y novedoso que se ha convertido en una pieza muy valorada entre nuestros clientes.
New
Trento (919)

Trento (919)

manivela modelo Trento fabricada en Zamac con un acabado combi en cromo/niquel satinado.

un diseño moderno con curvas elegantes, reflejos imposibles y un agarre práctico y visual, hacen de esta maneta una novedad para 2018.

 
New
HYGGE

HYGGE

HYGGE  handle has an elegant presence and modern, this new handle made ​​on zinc alloy is a piece of italian quality and design, one of our new features for this year 2018. 

available in: satin crome, shinny crome , white, and black matte finish.
New
SPRING

SPRING

SPRING  handle has an elegant presence and modern, this new handle made ​​on zinc alloy is a piece of italian quality and design, one of our new features for this year 2018. 

contemporary and elegant, draws a sophisticated game of overlapping shapes.

available in: satin crome, antique brass matte finish , white, and black matte finish.
New
BIMYOU

BIMYOU

BIMYOU  handle has an elegant presence and modern, this new handle made ​​on zinc alloy is a piece of italian quality and design, one of our new features for this year 2018. 

available in: satin crome, antique brass matte finish , white, and black matte finish.
New
TECHNA PULL- handle

TECHNA PULL- handle

TECHNA handle has an elegant presence and modern, this new handle made ​​on zinc alloy is a piece of italian quality and design, one of our new features for this year.
Featured
NERA

NERA

Handle made of zamac with an excellent black finish, an elegant, simple and modern design that will give your doors a different and current style.

Get carried away by this new trend and make your doors fashionable with our range of products in black.

Available in square or round rosettes.

matching keyholes and convictions available (sold separately)
New
MASTER

MASTER

MASTER  handle has an elegant presence and modern, this new handle made ​​on zinc alloy is a piece of italian quality and design, one of our new features for this year 2019. 

available in: satin crome, antique brass matte finish , white, and black matte finish.
New
Asas de embutir (copia)

Asas de embutir (copia)

Asas de embutir fabricadas de acero inxidable 304 con la parte trasera ovalada. 

Disponibles con frontal ovalado o rectangular en las siguientes medidas:

120 x 40 mm OVALADA  
150 x 50 mm OVALADA 

120 x 40 mm RECTANGULAR
150 x 50 mm RECTANGULAR